|Title: Rear Whell damper bushings|
|The_XL_Board > THE XL BOARD > XL175||Go to subcategory：|
Date Posted：01/12/2018 11:33 PMCopy HTML
does anyone have any experience with replacing the bushings in the rear hub? there's 4 of them and i took them out to get the hub powder coated. i've got 4 new ones on order and i'm just wondering if there's going to be any tricks or tools involved. i don't actually remember how they got out, i think my painter must have taken them out for me. so i don't have any notions on how they go back in. i imagine it will be a press fit, but if anyone has done this before i'd appreciate your insight.
Re：Rear Whell damper bushings
Date Posted：05/16/2018 4:21 PMCopy HTML
I took out the bushings on my XL125 rear hub and they were a bear to remove. I had to get brake cleaner to partially dissolve the rubber to remove. Removing is the HARD part, installing is easy, like you surmised, it is just a press fit.