The_XL_Board Ticket | Today | Join | Member | Search | Who's On | Help | Sign In | |
The_XL_Board > THE XL BOARD > XL250 Go to subcategory:
Author Content
richtull
  • Rank:XL Board Member
  • Posts:1
  • From:United Kingdom

Date Posted:04/19/2018 8:19 AMCopy HTML


Hi everyone,

First post and I'm hoping somebody out there might be able to help me out, I’m restoring a XL250 Motosporthere in the UK, and on stripping the engine I see it’s had a bigger bore upgradeso my Head Gasket doesn’t fit, does anybody know where I might get hold of a 305 (82mm) Head Gasket?, even in a set?, been searching all the resources and contacts I had but no joy at all.

Any help or advice much appreciated.


Teejayexc #1
  • Rank:Bronze Member
  • Posts:33
  • From:United Kingdom

Re:XL305 Head Gasket

Date Posted:04/19/2018 6:54 PMCopy HTML

Hi, can't help with the oversize gasket I'm afraid, but if you've no use for the gasket you have I'll take it off your hands if you want to sell.
Regards TJ.
tuscarawas #2
  • Rank:Diamond Member
  • Posts:553
  • From:USA

Re:XL305 Head Gasket

Date Posted:04/19/2018 11:34 PMCopy HTML

You might try this place out. e-mail him and see if he can help you or know some one who can. I did see some one here in the states that sells custom head gaskets for xl's on e-bay too, but can't remember who. If I remember I'll post it here.
http://www.hondaxl350.com/parts.html

tuscarawas #3
  • Rank:Diamond Member
  • Posts:553
  • From:USA

Re:XL305 Head Gasket

Date Posted:04/19/2018 11:37 PMCopy HTML

You might try this site too.
http://www.xlintperformance.com/performanceparts.htm

Another place to look into.
http://www.coppergaskets.us/MCExamples.html

E bay store for copper gaskets.
http://stores.ebay.com/coppergasketsunlimited/
JKCanuck #4
  • Rank:Bronze Member
  • Posts:27
  • From:Canada

Re:XL305 Head Gasket

Date Posted:05/07/2018 7:05 PMCopy HTML

Rich;  Check out the info on this thread "XL250"   "298 kit compression".  Terry Miller, who took over much of the old Powroll big bore stuff will likely have everything you may need. Failing that, an XL350 (74-78) head gasket will fit. I used that gasket on my 80.7mm bore Powroll kit.



Go soothingly on the grease mud ... as there lies the skid demon! ...






Free counters!


Flag Counter>


Web Counters
Hit Counter

Copyright © 2000-2018 Aimoo Free Forum All rights reserved.